Walkthrough (Industrial training)

Industrial Training I

Recommended fitting

Fit your Arkhe Mk2 with 1x standard geoscanner, 2x Syn-tec small miner module and 1x standard lightweight frame.

Recommended charges

You need to buy the following from the market (the type of raw mineral you need to acquire can vary):

  • Directional geoscanner charges (30 should be enough);
  • Tile-based geoscanner charges (10 should be enough);
  • Miner charges (100 should be enough).
Follow the instructions:
  • Find the raw mineral you are instructed to mine, like you did with the General Training III assignment.
  • Mine the required amount of raw minerals.
  • Deliver the required amount of raw minerals to the terminal. Once you're inside, bring up the assignment window, right-click the assignment, then choose 'deliver'.

Industrial Training II

Recommended fitting

Fit your Arkhe Mk2 with 1x Syn-tec small harvester and 1x standard lightweight frame.

Recommended charges

You need to buy the following from the market:

  • universal harvester charge (50 should be enough).
Follow the instructions:
  • Find the plants you need to harvest. This might be somewhat tricky, since plants can be harvested empty (causing the plant to dissappear). You might have to move quite a distance to find the plants you're looking for. Stick to the highways to move around quicker, then move in-land if you're still come up empty.
  • Deliver the required amount of plants to the terminal. Once you're inside, bring up the assignment window, right-click the assignment, then choose 'deliver'.

Industrial Training III

Recommended fitting

Fit your Arkhe Mk2 with 1x standard lightweight frame and make sure your cargo is empty.

Follow the instructions:
  • Move to point A.
  • Use the interactive landmark at point B.
  • Use the interactive landmark at point C.
  • Use the interactive landmark at point D.
  • Move to point E.
  • Submit the assignment item at the interactive landmark (point F) by moving the item from your cargo.

Industrial Training IV

Recommended fitting

Fit your Arkhe Mk2 with 1x standard lightweight frame and make sure your cargo is empty.

Follow the instructions:
  • Move to point A.
  • Use the interactive landmarks at point B and C.
  • Now enter the terminal.
  • Move both the item and the decoder out of your cargo into your private storage. Now open up the reverse engineering window, and drag in the item and the decoder.
  • Start the reverse engineering. This will take about 2 hours.
  • Deliver the resulting CT to the terminal. Once you're inside, bring up the assignment window, right-click the assignment, then choose 'deliver'.

Industrial Training V

  • You will receive a light industrial robot, an Argano, for completing this assignment.
Recommended fitting

Fit your Arkhe Mk2 with 1x standard lightweight frame and make sure your cargo is empty.

Follow the instructions:
  • Move to point A.
  • Use the interactive landmarks at point B and C.
  • Get back and enter the terminal.
  • Drag the two fetched items from your cargo to your private storage.
  • Open the factory window, and drag in the CT. This will calibrate a factory line, and allows you to manufacture the item. Click 'manufacture' to start the process, this will take about 25 minutes.
  • Once the manufacturing is done, right-click the factory line and select 'Extract CT'. You can now deliver the assignment.